56366 1/14 R/C Mercedes-Benz Arocs 4151 8x4 Tipper Truck

Tamiya 56366 1/14 R/C Mercedes-Benz Arocs 4151 8x4 Tipper Truck

The TAMIYA truck for tough construction site use! The Mercedes Benz Acros 4151 8x4 is a real heavyweight on the construction site. TAMIYA has modified the proven chassis for this truck: As in the original, the truck has 4 axles. The two rear axles are driven by a powerful 540 electric motor. The two front axles are linked via a servo (sold separately). The steering angle of the two axles is different so that driving behavior that is true to the original is achieved.
The frame has a subframe to accommodate the newly designed dump body. The trough was reinforced with a metal subframe and can be controlled via the optional TAMIYA ACU-01 unit (56545).

The unmistakable design of the new Arocs is as extraordinary as the truck as a whole. In the look, which was specially developed for construction vehicles, a radiator grille in the so-called excavator tooth optics was installed, which should convey the message: "Bite through and grab". To match the robust appearance, special protective grilles for the lighting system are attached to the bumper.

With the 667 mm long and around 4 kg heavy kit model, impressive combinations can be put together. The proven and robust TAMIYA truck technology can be found under the forward tilting cab. A new Mighty-Tuned 35T electric motor transfers its power to the two rear axles via a switchable 3-speed gearbox. A detailed aluminum ladder frame gives the model the necessary stability and flexibility.
A hitch (e.g. Carson 500907182) can be attached to the rear part of the frame and use it to pull trailers.

With the optionally available multifunctional unit, almost all sound and light functions of the model can be simulated deceptively real.

Required accessories:
-
Scope of delivery:
Kit model with detailed instructions, electric motor, 3-speed manual transmission

- Kit model in 1:14 scale
- Dimensions length 667 mm, width 196 mm, height 168 mm
- TAMIYA 4-axle chassis with reinforced frame and drive for the two rear axles
- Both double axles at the front are linked via a steering servo. The axles turn at slightly different angles for a prototypical driving behavior.
- prototypical ABS body replica of the Arocs 4151, including handrails, steps, side mirrors and much more.
- New dump body with a metal subframe. The tipping skip can be controlled via the separately available ACU-1 (300056545) (TAMIYA MFC-03 unit 56523 required).
- Including TR mighty-tuned motor for perfect power delivery to the two driven rear axles.
- New rear tires, bumper and fenders.
- 3-speed manual transmission can be controlled via an optional 4-channel remote control.
- Leaf springs on the axles and rear shock absorbers with coil springs
- The headlights on the roof lamp bracket can be equipped with LEDs (available separately).

Recommended accessories:
MFC-03 multifunctional unit (300056523) for driving, light and sound functions; ACU-01 spindle drive unit (300056545) for the tilt function