Boost 10 Combo KV=1400 C3166 Brushless Motorset

Pichler Brushless Motor BOOST 10 KV=1400 Combo C3166

Item number: C3166
EAN: 4056534001392

High quality brushless motor BLDC (external rotor) for model aircraft. The BOOST motor series is the result of our over 15 years of experience in the field of modern electric drives.

Product features:
- Highest manufacturing quality
- Perfect ventilation due to open housing design
- Use of the best materials
- High temperature resistant neodymium magnets
- Extra large quality ball bearings

Range of use - model/take-off weight:
- 3D aerobatic models up to approx. 350g
- Aerobatic models up to approx. 400g
- Scale models and trainers up to approx. 500g
- Gliders up to approx. 600g

Technical data:
- Dimensions Ø = 28mm / L = 25mm
- Weight = 49g
- Shaft diameter = 3.2mm (3.175mm)
- LiPo battery (recommended) = 2 -3 cells
- Idle speed per Volt = 1400 RPM-1 (KV)
- Max. Load = 10A (20s)
- Brushless speed controller (recommended) = PICHLER XQ-12, # C3187

Propeller (recommended):
- PI-CON 7x5, # C5745 @ 2S LiPo (7,4V)
- PI-CON 6x4, # C5744 @ 3S LiPo (11,1V)

LiPo battery (recommended):
- LEMONRC 1000-7.4, # C6739
- RED POWER 1000-11,1V, # C6786

Scope of delivery
- BOOST 10 brushless motor
- XQ-12 A controller + XQ programming card
- Aluminum mounting cross
- 1 propeller adapter each for leading and trailing edge mounting
- Mounting screws
- Spare motor shaft
- Manual German/English

Note Of course, other propellers (e.g. 3-blade or smaller sizes) than specified here can be used. Also batteries with other, e.g. higher capacity can be used. Please make sure that the permissible currents (A) are not exceeded. For simple current measurement we recommend our proven POWER WATTS 150, # C7282. A device which is always needed and should not be missing in any equipment.