606035 Expert Charger Duo 12V/230V 10A

Carson 606035 Expert Charger Duo 12V/230V 10A

User-friendly duo charger for use indoor and on the road. If use the charge output A you can charging/discharging in 3 cycles always ensure a fresh battery. The charge output B ist only for charging a battery. The Delta-Peak charge monitoring automatically terminates the charging process. The following battery types can be charged by using the CARSON Expert Charger Duo:
NiCd/NiMH, Li-Po, Li-Fe, Li-Ion and Pb.
The display allows the charging process to be monitored optimally, and the following values can be retrieved and also set: battery type/cell, charging status, voltage, ampere, time, input voltage, peak value, mean value and capacity.

Technical Details:
supply 11 V - 15 V; via mains 110 V - 230 V (50/60Hz) Charge power at 230 V: 70 W (if only charge output A is used/2x 35 W (if both charge outputs are used at the same time)
Charge power at 12 V: 70 W (if only charge output A is used/2x 35 W (if both charge outputs are used at the same time)
Discharge power: 5 W (only charge output A)
Charge current: 0.1 A - 10 A (charge output A), 0.1 A - 5 A (charge output B)
Discharge current: 0.1 A - 10 A (only charge output A)
Balance power: approx.150 mA (XHP connector)
Trickle charge: approx. 80 mA (only for NiCd/ NiMH batteries)
Trickle charge: approx. 80 mA (only for NiCd/ NiMH batteries)

- Li-Po (3.7 V) (1 - 6 cells)
- Li-Fe (3.3 V) (1 - 6 cells)
- Li-Ion (3.6 V) (1 - 6 cells)
- Pb (2 V - 24 V) (1 - 12 cells)
Cell-end voltages:
- 0.8 V per cell, NiCd and NiMH
- 3 V per cell, Li-Po/Li-Ion
- 2.5 V per cell, Li-Fe - 1.8 V per cell, Pb
Dim.: 188 x 163 x 77 mm